Barbaro roundup

30 01 2007

PREAKNESS 131, originally uploaded by Banamine.

Barbaro may be laid to rest at Churchill Downs…

Wingspan Expressions reports that over 18,000 candles from 41 countries are alight in Barbaro’s honour on a virtual candle website

The Breyer Barbaro was retired on January 1, 2007, so your best bet is probably eBay, where it’s going for ridiculous prices…

The LAist reminds us that he was “just a horse“…

Gulfstream Park and the University of Florida will honour his memory by establishing a veterinary scholarship in his name…

Philadelphia Weekly offers a hilariously cynical field guide to Barbaro messageboard factions

Here’s the official statement from Churchill Downs…

Here’s a story about Barbaro’s vet (use BugMeNot if it asks you to register)…

 





Foal roundup

30 01 2007


bassgirl1970

Last year, MiKael at Rising Rainbow had a unique experience: her Arab mare Scandalous Love gave birth to twins! You can read more about them here; MiKael goes into even more detail on her blog. Both foals, a filly named Scandalous Surprise and a colt named Scandalous Trouble, are doing well now and more than living up to their names. Coppertop’s Belgian mare Rowan is expecting any minute nowIT’S A GIRL! Those of you who hope to catch a foaling online can refer to an earlier post on Bridlepath, Horse Cams, for some links; also check out Mare Stare and FoalNet. Anyone else out there expecting any blessed events in the barn?





How to rewire a model horse’s leg

30 01 2007

stablemate Morgan, originally uploaded by appaIoosa.

According to my stats, someone keeps coming to Bridlepath with that search string: “how to rewire a model horses leg“. Anyone out there actually know how to do it, so we can help this anonymous person? I was able to find this at Mane Connection:

Breyer models are made of Cellulose Acetate. The composition of cellulose acetate will not allow it to be glued with everyday adhesives like Elmers, model cement, or even Crazy Glue. For best results, you should use acetone, or an adhesive high in acetone to repair breaks. Nail polish remover, which is a dilute mixture of acetone and water, is usually too dilute to work well and should not be attempted if it contains skin softeners or moisturizers such as aloe or lanolin.Acetone can be found at hardware stores. Acetone is flammable slightly toxic and reactive to other chemicals that you may have around the house (for example hydrogen peroxide or bleach). It should be only used in a well-ventilated area and skin contact should be avoided.The following will make your broken model almost as good as new. The break point will have almost the same strength as it did before the break if the following steps are performed properly. If one of your favorite models needs surgery, it might be wise to first practice on a less favorite model to gain experience and confidence. Follow these steps to insure a good bond:

  1. Make sure that the surface of the break is clean.
  2. Put a small drop of acetone on each part and allow it to stand 10-30 seconds. Do not over apply the solvent or you risk over-softening (melting) the pieces and destroy the paint.
  3. Carefully put the two pieces together and hold for at least one minute.
  4. Let the bond set for at least an hour. Make certain that there is no pressure or strain on the broken area.

The break in a leg can be strengthen by putting a small pin in it. Drill a small hole (slightly smaller than the diameter of the pin) in one face of the break and insert the pin. Align the two pieces and press them together so that the pin makes a indentation where you should drill the hole in the in the second piece then drill the second hole.

OK, anonymous person, does that help? 🙂

Kennebec Count
Kennebec Count








%d bloggers like this: